Optical TRAP Detectors for spectral calibration
- Английский
SDX-1226-2
Precision current to voltage amplifier, for use with TRAP detectors.
Ключевые особенности семейства продуктов
High precision current to voltage amplifier
These amplifiers include a microprocessor for remoted set up and control. They use thermally stable, precision resistors to provide highly accurate conversion of current to voltage.
Manual or remote control
They provide six gain ranges from 10 KΩ to 1 GΩ. These ranges can be selected manually or by remote control using the USB interface and our software. They can also be selected manually using the rotary switch.
Power supply options
- SDX-1153 preamp is power over the USB 2.0 and requires +5V at 500 mA.
- SDX-1226-1 and -2 require use of an external DC power supply.
Совместимость детектора
-
Фотодетектор
Average power (compatible with TRAP series only)
Связанные продукты
-
TRAP7-Si-C-BNC
Optical trap detector for laser power measurement up to 1 mW.
-
TRAP7-Si-D-BNC
Optical trap detector for laser power measurement up to 1 mW.
Характеристики контроллера и графического интерфейса
-
Аналоговый вывод
BNC, ± 10 V -
Внешний триггер
None -
Последовательные команды через
USB -
Внешний источник питания
External DC power jack
Характеристики измерителя мощности
-
Цифровое разрешение
19 pA -
Точность устройства
0.01%
Характеристики измерителя энергии
-
-
Для этого продукта нет принадлежностей.
-
There is no user manual available for this product.
-
The following specs are based on the accuracy of the internal gain resistors, operating from 18°F to 82°F and at a relative humidity 80% or less.
| Power range | Accuracy | Temperature coefficient |
| 10 kΩ | 0.01% | 5 ppm |
| 100 kΩ | 0.01% | 5 ppm |
| 1 MΩ | 0.01% | 5 ppm |
| 10 MΩ | 0.01% | 5 ppm |
| 100 MΩ | 0.025% | 10 ppm |
| 1 GΩ | 0.50% | 25 ppm |
Your item has been added to your cart!
You might need these specific products to be able to use the placeholder only.
Compatible products
No compatible product
