RU

QE12SP-H-MT-D0

P/N 200532

Pyroelectric detector for laser energy measurement up to 0.70 J.

    • 50 mm Ø
    • 95 mm Ø (90 mm Ø)
    • 195 mm Ø (185 mm Ø)
    • 7.8 x 7.8 mm
    • 12 x 12 mm (9 x 9 mm)
    • 25 x 25 mm (22 x 22 mm)
    • 50 x 50 mm (47 x 47 mm)
    • 65 x 65 mm (62 x 62 mm)
    • Convection
    • Heatsink
    • Water
    • MB - Standard
    • MT - High Repetition Rate
    • MB - Standard (tuned for short pulses)
    • MT - High repetition rate (tuned for short pulses)
    • BL - Spectrally flat
    • MB - Standard (tuned for long pulses)
    • Нет
    • QED - ослабитель высокой энергии
    • Standard
    • INTEGRA (USB)
    • INTEGRA (RS-232)
    • INTEGRA (USB с внешним триггером)
    • BLU (беспроводной)
QE12SP-H-MT-D0 QE12SP-H-MT-D0 QE12SP-H-MT-D0 QE12SP-H-MT-D0 QE12SP-H-MT-D0 QE12SP-H-MT-D0 QE12SP-H-MT-D0 QE12SP-H-MT-D0 QE12SP-H-MT-D0 QE12SP-H-MT-D0 QE12SP-H-MT-D0 QE12SP-H-MT-D0 QE12SP-H-MT-D0 QE12SP-H-MT-D0 QE12SP-H-MT-D0 QE12SP-H-MT-D0 QE12SP-H-MT-D0 QE12SP-H-MT-D0

Traceable calibration:

Logo nist

Available with

Logo Integra

Ключевые особенности семейства продуктов

Modular Concept

Increase the power capability of your detector: 2 different cooling modules

Low Noise Level

0.7 µJ for the MB coating

QED Attenuator Available

Measure up to 5X higher energies. Available with optional calibration, all wavelengths between 532 & 1064 nm, or single wavelength. Read more.

High repetition rate options

  • QE12HR-MB: 1 000 Hz
  • QE12HR-MT: 10 000 Hz

Test Target Included

With the MB models

Smart Interface

Containing all the calibration data

Совместимая подставка

Совместимые экраны & интерфейсы ПК

  • MIRO ALTITUDE MIRO ALTITUDE

    Touchscreen display device for power & energy measurement. Single-channel.

  • MAESTRO MAESTRO

    Touchscreen display device for power & energy measurement. Single-channel, multiple outputs (USB, Ethernet, analog).

  • U-LINK (USB) U-LINK (USB)

    PC interface for power & energy measurement. Single-channel, USB output.

  • U-LINK (RS-232) U-LINK (RS-232)

    PC interface for power & energy measurement. Single-channel, RS-232 output.

  • INTEGRA INTEGRA

    Embedded PC interface for power & energy measurement. Can only be purchased as a detector output option.

  • S-LINK-1 (Ethernet) S-LINK-1 (Ethernet)

    PC interface for power & energy measurement. Single-channel, USB & Ethernet output.

  • S-LINK-2 (Ethernet) S-LINK-2 (Ethernet)

    PC interface for power & energy measurement. Dual-channel, USB & Ethernet output.

  • M-LINK M-LINK

    PC interface for power & energy measurement. Single-channel, USB output.

  • S-LINK-1 S-LINK-1

    PC interface for power & energy measurement. Single-channel, USB output.

  • S-LINK-2 S-LINK-2

    PC interface for power & energy measurement. Dual-channel, USB output.

Included

  • Calibration Calibration

    Calibration certificate

  • PWC PWC

    Personal wavelength correctionTM Certificate

  • COVER

    Protective cover for optical surfaces

Возможности измерения

  • Спектральный диапазон

    0,193 - 20 μm

  • Типичное время нарастания

    20 µs

  • Повторяемость

    <0.5%

  • Максимальная частота повторения

    6000 Hz

  • Максимальная измеряемая энергия

    0,7 J

  • Эквивалентная энергия шума

    0,8 μJ

  • Максимальная ширина импульса

    10 μs

  • Неопределенность калибровки энергии

    ±3 %

Пределы прочности

  • Максимальная средняя плотность мощности

    10 W/cm²

  • Максимальная плотность энергии

    0,5 J/cm²

  • Максимальная мощность

    5 W

Физические характеристики

  • Охлаждение

    Конвекция (радиатор)

  • Ширина диафрагмы

    12 mm

  • Высота диафрагмы

    12 mm

  • Абсорбер

    MT

  • Размеры

    36H x 36W x 33D mm

  • Вес

    0,12 kg
Распечатать характеристики

CA$1,516.00*

CONTACT SALES

Handle high repetition rates with the MT absorber

Designed for pulsed lasers with high repetition rates, the MT absorber features an improved temporal response to accurately measure pulse-to-pulse energy at high repetition rates up to 10 kHz.

Customers enjoy:

  • Measure all pulses at high repetition rates
  • Low risk of damaging the equipment
  • Suitable for a wide range of laser wavelengths

NIST-TRACEABLE CALIBRATION INCLUDED

Traceable calibration provides the ability to trace the readings of laser output measurements to known international measurement standards determined by the National Institute of Standards and Technology (NIST). This ensures that the measurements taken by the instruments are reliable and accurate.

Benefits include:

  • Make valid comparisons of measurements taken by other instruments inside and outside your organization and over time
  • Comply with regulations or conform to industry standards
  • Avoid costly measurement mistakes in your operations
  • Improve customer confidence in your laser systems
  • Ensure laboratory experiment validity
  • Demonstrate measurement accuracy easily with the calibration certificate we provide
 

Optional INTEGRA (USB or RS-232) output

When you choose the INTEGRA output option you get an all-in-one measurement instrument that combines both the detector and the meter in one convenient product. Plug the detector in your PC, install our free software and start measuring.

Why choose it?

  • The most cost-efficient solution
  • Same measurement performance as our other solutions
  • No compromise on interface functions and features
  • Compact solution for OEM applications and field servicing
  • Save money on recalibration with an all-in-one instrument
 

Связанные видео

All videos

Совместимые продукты, которые могут вам понадобиться

*Does not include shipping fees, import fees or local representation. Request quote for full details and local sales contact.

Your item has been added to your cart!

You might need these specific products to be able to use the placeholder only.

Compatible products

No compatible product

Проверить, работает ли этот продукт с вашим лазером

Тип измерения:

1

Размер луча

2

Тип лазера

3

Профиль луча

COPYRIGHT ©2024 Gentec-eo Spektrum média