BLU

EASY TO CONNECT

Connecting a BLU device is very simple in the mobile application. Just open the app and it will automatically search for all available devices. Then, tap on the desired device in the list.

If there are no devices within range, the app will propose a simulator.

When a BLU detector is connected to a phone or computer, no other device can communicate with it.

MEASUREMENT PARAMETERS

The menu tab, available with the icon or by swiping from the left of the screen, allows you to configure the parameters related to your measurements:

• Wavelength: enter the wavelength of your laser and the software will apply the appropriate correction factor on the measurements.
• Range: set the power or energy range to a fixed scale or let the software automatically adjust the scale.
• Measure mode: select the type of measurement that will be displayed: power, in watts (default) or single shot energy, in joules (energy/calorimeter mode).
• Corrections: apply a multiplication factor and/or an offset to your measurements.
• Trigger level: set the trigger level in 0.1% steps, from 0.1% to 99.9% (in energy mode only).
• Connection: use this option to see the list of BLU devices within range.

MULTIPLE DISPLAYS

Select the display that suits you best and watch your measurements in real time! Simply swipe the screen to switch between the various displays:

• Scope: line filling graph
• Needle: fast analog-like needle
• Real Time: real time value and corresponding bar graph
• Statistics: min, max, average, RMS and PTP stability and standard deviation

DATA ACQUISITION

The acquisition screen allows you to enter the parameters for data acquisition:

• Power mode: choose a sample rate (number of measurements per interval of time) and a duration (in days, hours, minutes and seconds) for the data acquisition.
• Energy mode: choose a sampling rate (1 pulse out of X pulses) and a duration (total number of pulses) for the acquisition of data.

Once the acquisition is complete, you can export the data to any of the data-sharing apps installed on your mobile device, or send it by email.

Leverage serial commands

Use our serial commands to communicate directly with the meter without using Gentec-EO's software. You can do so using a terminal emulator software, like PuTTY, or you can just integrate them directly into your own software. All essential functions of the meter are covered by a command. Refer to the user manual of the meter for the list of all commands available.

Benefits:

• Build your own software
• Suit your unique laser application requirements
• Automate your measurements

NIST-TRACEABLE CALIBRATION INCLUDED

Benefits include:

• Make valid comparisons of measurements taken by other instruments inside and outside your organization and over time
• Comply with regulations or conform to industry standards
• Avoid costly measurement mistakes in your operations
• Improve customer confidence in your laser systems
• Ensure laboratory experiment validity
• Demonstrate measurement accuracy easily with the calibration certificate we provide