Monitors

The Gentec-EO monitors come in various sizes and types to cover all applications. We have monitors with or without display (PC-based) and for power or energy readings, or both. We also offer the fastest digital needle display on the market.

Integra

Features

The INTEGRA is a meterless line of All-in-One detectors that combine a detector and a meter in one convenient product. The small but powerful meter of the INTEGRA Series presents a direct USB or RS-232 connection so you can plug it into your PC or acquisition system. Simply use the PC-Gentec-EO software supplied with your product and be ready to make power or energy measurements within seconds! each detector of the INTEGRA Series offers the same incredible performance as the usual detector and meter combination, from pW to kW and from fJ to J. And the good news is that all our most popular products are available with the INTEGRA option.


  • All-in-One Detector + Meter Plug your detectors directly into your PC with the INTEGRA embedded monitor
  • Incredible Performance INTEGRA detectors offer the same performance as the usual detector + monitor combination
  • NEW - USB or RS-232 INTEGRA detectors are offered with a choice of USB (standard) or RS-232 connector (in option)
  • NEW - External Trigger A 0-2V external trigger is available in option on every compatible INTEGRA energy detector
  • Compact Size Perfect for the lab, OEM applications and field servicing. No need to carry a meter!
  • Lower Recalibration Costs One Product = One Calibration. Reduce your recalibration costs by half!
  • Universal Software Control your INTEGRA detector with the same powerful software as the MAESTRO
  • Available with:

NEW DESIGN and CONNECTOR OPTIONS




PC-GENTEC-EO - UNIVERSAL SOFTWARE

MAIN CONTROLS

Complete and easily navigable software interface with all the necessary options and tools:

  • Connection: Connect or Disconnect your device.
  • Controls: Turn the Turbo Mode ON or OFF, make a Zero to remove the thermal offset, start the Acquisition of the data and start the calculations of the Statistics associated with this data.
  • Startup Config: Save your measurements settings or Load the settings associated with an already existing file.
  • Help: Get information about the PC-Gentec-EO software and read the user manual.
  • Measure: Configure the parameters related to your measurements.
  • Display: Set the desired number of digits and settings associated with the selected display.
  • Acquisition: Enter the parameters related to the acquisition of data.

 

MEASUREMENT PARAMETERS

The Measure tab allows you to confi gure the parameters related to your measurements:

  • Wavelength: Enter the Wavelength of your laser and the software will apply the appropriate correction factor on the measurements.
  • Range: Set the power or energy Range to a fi xed scale or let the software automatically adjust the scale.
  • Measure Mode: Select the type of Measurement that will be displayed (power, energy) and let the software know if you want Anticipation and if there is any Attenuation.
  • Corrections: Apply a Multiplication Factor and/or an Offset to your measurements.
  • Trigger Level: Set the Trigger Level in 0.1% steps, from 0.1% to 99.9% (in energy mode only).

 

MULTIPLE DISPLAYS

Select the display that suits you best and watch your measurements in real time! With the options toolbar in the bottom of the interface, you can manage the displays at your convenience:

  • Real Time: Real time value and corresponding bar graph
  • Scope: Line filling graph
  • Needle: Fast analog-like needle
  • Averaging: Shows trend of laser over time
  • Histogram: Displays up to 100 bars
  • Statistics: Min, Max, Average, RMS and PTP Stability, Rep. Rate and Standard Deviation

 

DATA ACQUISITION

The Acquisition tab allows you to enter the parameters for data acquisition:

  • Power Mode: Choose a Sampling Rate (number of measurements per interval of time), a Total Duration (in days, hours, minutes and seconds) for the data acquisition, a Time Stamp for each value and the File Name and File Location. You can choose to save only the raw data and/or the statistics associated with your data acquisition.
  • Energy Mode: Choose a sampling rate (1 pulse out of X pulses), a total duration (total number of pulses) for the acquisition of data, a timestamp for each value, the fi le name and fi le location. Decide if you want to save raw data and/or the statistics associated with this data.

 


SEE IT IN ACTION!