U-LINK: Small, fast & universal PC interface for laser power and energy measurement

The U-LINK is our new PC interface that can replace all others! It is as small as the P-LINK, as fast as the S-LINK and as versatile as the M-LINK.

• Reads ALL our detectors, for both power and energy measurement
• Available with either a USB or an RS-232 output
• Compact and economical

THE UNIVERSAL PC-BASED METER

Reads ALL Heads:

• Power: Thermopiles, Photodetectors and Pyroelectrics
• Energy: Thermopiles (in single shot mode), Photodetectors and Pyroelectrics

MEASURE fJ ENERGY LEVELS

Thanks to a unique digital method for suppressing the noise on the lower energy ranges

Buyer's checklist for laser power & energy meters

Ensure you purchase the most optimal solution for your measurement needs with this checklist.

Download it now, it's helpful and free!

EXTERNAL TRIGGER

Synchronize your U-LINK to your pulsed laser or digital chopper

SYNCHRONIZE MULTIPLE CHANNELS

With the “SYNC. OUT” port, you can plug multiple U- LINK devices together and create a low-cost multichannel system.

SERIAL COMMANDS

Serial commands are available on both versions to let you take full control

FREE & INTUITIVE SOFTWARE

Includes an acquisition module and real-time statistical functions such as: Max, Min, Average, Standard Deviation, RMS and PTP Stability.

U-LINK product pages:

• USB version: https://www.gentec-eo.com/products/u-link-usb
• RS-232 version: https://www.gentec-eo.com/products/u-link-rs-232

These products will be shown at LASER World of Photonics Munich 2019 (booth B3.303).