EN

PE3B-Si-D0

Photodiode detector for laser energy measurement up to 24 pJ.

    • 3 mm Ø
    • 5 mm Ø
    • 10 mm Ø
    • UV-Silicon
    • InGaAs
    • Germanium
    • None
    • Standard (DB15)
    • INTEGRA (USB)
    • INTEGRA (RS-232)
    • INTEGRA (USB with external trigger)
    • BLU (wireless)
PE3B-Si-D0 PE3B-Si-D0 PE3B-Si-D0 PE3B-Si-D0 PE3B-Si-D0 PE3B-Si-D0 PE3B-Si-D0 PE3B-Si-D0 PE3B-Si-D0 PE3B-Si-D0 PE3B-Si-D0 PE3B-Si-D0 PE3B-Si-D0 PE3B-Si-D0 PE3B-Si-D0 PE3B-Si-D0 PE3B-Si-D0 PE3B-Si-D0

Traceable calibration:

Logo nist

Available with

Logo Integra

Product family key features

Very low noise level

Take measurements with a noise level as low as 8 fJ (model PE3B-Si only) with the M-LINK, MAESTRO and S-LINK monitors.

3 sensors available

  • PE-B-SI family: 3 and 10 mm Ø silicon sensors for 0.21 to 1.08 µm
  • PE5B-GE: 5 mm Ø, germanium sensor for 0.8 to 1.65 µm
  • PE3B-IN: 3 mm Ø, InGaAs sensor for 0.9 to 1.7 µm

Smart interface

Containing all the calibration data

Compatible stand

Compatible displays & PC interfaces

  • MAESTRO MAESTRO

    Touchscreen display device for power & energy measurement. Single-channel, multiple outputs (USB, Ethernet, analog).

  • U-LINK (USB) U-LINK (USB)

    PC interface for power & energy measurement. Single-channel, USB output.

  • U-LINK (RS-232) U-LINK (RS-232)

    PC interface for power & energy measurement. Single-channel, RS-232 output.

  • INTEGRA INTEGRA

    Embedded PC interface for power & energy measurement. Can only be purchased as a detector output option.

  • S-LINK-1 (Ethernet) S-LINK-1 (Ethernet)

    PC interface for power & energy measurement. Single-channel, USB & Ethernet output.

  • S-LINK-2 (Ethernet) S-LINK-2 (Ethernet)

    PC interface for power & energy measurement. Dual-channel, USB & Ethernet output.

  • M-LINK M-LINK

    PC interface for power & energy measurement. Single-channel, USB output.

  • S-LINK-1 S-LINK-1

    PC interface for power & energy measurement. Single-channel, USB output.

  • S-LINK-2 S-LINK-2

    PC interface for power & energy measurement. Dual-channel, USB output.

  • APM (D) APM (D)

    Analog power module, to interface -B heads with oscilloscopes and lock-in amplifiers.

Included

  • Calibration Calibration

    Calibration certificate

  • PWC PWC

    Personal wavelength correctionTM Certificate

  • COVER

    Protective cover for optical surfaces

Measurement capabilities

  • Spectral range1

    210 - 1080 nm

  • Typical rise time

    15 µs

  • Maximum repetition frequency

    1000 Hz

  • Maximum measurable energy2

    24 pJ

  • Noise equivalent energy3

    8 fJ

  • Maximum pulse width

    10 μs

  • Energy calibration uncertainty

    ±4 % (634 nm)
    • 1. This detector is NIST-traceable at the calibration wavelength of 634 nm. Typical values are used at other wavelengths.
    • 2. At 634 nm. See curves for maximum power at other wavelengths.
    • 3. Nominal value. Actual value depends on environmental electromagnetic interference and wavelength.

Damage thresholds

  • Maximum power

    66 nW

Physical characteristics

  • Aperture diameter

    3 mm

  • Absorber

    SiUV

  • Dimensions

    38.1Ø x 27.4D mm 

  • Weight

    0.09 kg

  • Distance to sensor face

    13.7 mm
Print specifications

CA$2,535.00*

CONTACT SALES Explore customization possibilities

NIST-TRACEABLE CALIBRATION INCLUDED

Traceable calibration provides the ability to trace the readings of laser output measurements to known international measurement standards determined by the National Institute of Standards and Technology (NIST). This ensures that the measurements taken by the instruments are reliable and accurate.

Benefits include:

  • Make valid comparisons of measurements taken by other instruments inside and outside your organization and over time
  • Comply with regulations or conform to industry standards
  • Avoid costly measurement mistakes in your operations
  • Improve customer confidence in your laser systems
  • Ensure laboratory experiment validity
  • Demonstrate measurement accuracy easily with the calibration certificate we provide
 

Optional INTEGRA (USB or RS-232) output

When you choose the INTEGRA output option you get an all-in-one measurement instrument that combines both the detector and the meter in one convenient product. Plug the detector in your PC, install our free software and start measuring.

Why choose it?

  • The most cost-efficient solution
  • Same measurement performance as our other solutions
  • No compromise on interface functions and features
  • Compact solution for OEM applications and field servicing
  • Save money on recalibration with an all-in-one instrument
 

Related videos

All videos

Compatible products you may need

*Does not include shipping fees, import fees or local representation. Request quote for full details and local sales contact.

Your item has been added to your cart!

You might need these specific products to be able to use the placeholder only.

Compatible products

No compatible product

Check if this product works for your laser

Measurement type:

1

Beam size

2

Laser type

3

Beam profile

COPYRIGHT ©2024 Gentec-eo Spektrum média