EN

QE25LP-S-MB-INT-D0

P/N 202381

Pyroelectric detector for laser energy measurement up to 3.8 J. With INTEGRA (USB) module.

    • 50 mm Ø
    • 95 mm Ø (90 mm Ø)
    • 195 mm Ø (185 mm Ø)
    • 7.8 x 7.8 mm
    • 12 x 12 mm (9 x 9 mm)
    • 25 x 25 mm (22 x 22 mm)
    • 50 x 50 mm (47 x 47 mm)
    • 65 x 65 mm (62 x 62 mm)
    • Convection
    • Heatsink
    • Water
    • MB - Standard
    • MT - High Repetition Rate
    • MB - Standard (tuned for short pulses)
    • MT - High repetition rate (tuned for short pulses)
    • BL - Spectrally flat
    • MB - Standard (tuned for long pulses)
    • None
    • QED - High Energy Attenuator
    • Standard
    • INTEGRA (USB)
    • INTEGRA (RS-232)
    • INTEGRA (USB with external trigger)
    • BLU (wireless)
QE25LP-S-MB-INT-D0 QE25LP-S-MB-INT-D0 QE25LP-S-MB-INT-D0 QE25LP-S-MB-INT-D0 QE25LP-S-MB-INT-D0 QE25LP-S-MB-INT-D0 QE25LP-S-MB-INT-D0 QE25LP-S-MB-INT-D0 QE25LP-S-MB-INT-D0 QE25LP-S-MB-INT-D0 QE25LP-S-MB-INT-D0 QE25LP-S-MB-INT-D0 QE25LP-S-MB-INT-D0 QE25LP-S-MB-INT-D0 QE25LP-S-MB-INT-D0 QE25LP-S-MB-INT-D0 QE25LP-S-MB-INT-D0 QE25LP-S-MB-INT-D0

Traceable calibration:

Logo nist

Available with

Logo Integra

Product family key features

Modular Concept

Increase the power capability of your detector: 2 different cooling modules

Low Noise Level

2 µJ for the MB coating

QED Attenuator Available

Measure up to 5X higher energies. Available with optional calibration, all wavelengths between 532 & 1064 nm, or single wavelength. Read more.

High Repetition Rate Options

  • QE25HR-MB: 1 000 Hz
  • QE25HR-MT: 10 000 Hz

Test Target Included

With the MB models

Smart Interface

Containing all the calibration data

Compatible stand

Included

  • Calibration Calibration

    Calibration certificate

  • PWC PWC

    Personal wavelength correctionTM Certificate

  • COVER

    Protective cover for optical surfaces

  • TEST-TARGET

    A target with the same optical absorber as your QE-MB detector.

Measurement capabilities

  • Spectral range1

    0.193 - 20 μm

  • Typical rise time

    550 µs

  • Repeatability

    <0.5%

  • Maximum repetition frequency2

    300 Hz

  • Maximum measurable energy3

    3.8 J

  • Noise equivalent energy4

    4 μJ

  • Maximum pulse width

    400 μs

  • Energy calibration uncertainty

    ±3 %
    • 1. For the calibrated spectral range, see the user manual.
    • 2. May be limited by the display or PC interface. Please refer to the corresponding user manual.
    • 3. At 1064 nm, 7 ns, 10 Hz. Increasing pulse width increases maximum measurable energy.
    • 4. Nominal value. Actual value depends on electrical noise in the measurement system.

Damage thresholds

  • Maximum average power density1

    10 W/cm²

  • Maximum energy density2

    0.6 J/cm²

  • Maximum power

    5 W
    • 1. May vary with wavelength and average power.
    • 2. At 1064 nm, 7 ns, 10 Hz. May vary with wavelength and pulse width.

Physical characteristics

  • Cooling

    Convection

  • Aperture width

    25 mm

  • Aperture height

    25 mm

  • Absorber

    MB

  • Dimensions

    50H x 50W x 14D mm

  • Weight

    0.12 kg
Print specifications

CA$2,440.00*

CONTACT SALES Explore customization possibilities

Broadband absorber with high damage thresholds

This detector features the MB absorber which offers high damage thresholds and a spectrally flat broadband response, making this energy detector a versatile solution that can cover several laser energy measurement needs.

Customers enjoy:

  • Low risk of damaging the equipment
  • Useful for measuring the energy of a wide range of lasers

NIST-TRACEABLE CALIBRATION INCLUDED

Traceable calibration provides the ability to trace the readings of laser output measurements to known international measurement standards determined by the National Institute of Standards and Technology (NIST). This ensures that the measurements taken by the instruments are reliable and accurate.

Benefits include:

  • Make valid comparisons of measurements taken by other instruments inside and outside your organization and over time
  • Comply with regulations or conform to industry standards
  • Avoid costly measurement mistakes in your operations
  • Improve customer confidence in your laser systems
  • Ensure laboratory experiment validity
  • Demonstrate measurement accuracy easily with the calibration certificate we provide
 

Optional INTEGRA (USB or RS-232) output

When you choose the INTEGRA output option you get an all-in-one measurement instrument that combines both the detector and the meter in one convenient product. Plug the detector in your PC, install our free software and start measuring.

Why choose it?

  • The most cost-efficient solution
  • Same measurement performance as our other solutions
  • No compromise on interface functions and features
  • Compact solution for OEM applications and field servicing
  • Save money on recalibration with an all-in-one instrument
 

Related videos

All videos

Compatible products you may need

*Does not include shipping fees, import fees or local representation. Request quote for full details and local sales contact.

Your item has been added to your cart!

You might need these specific products to be able to use the placeholder only.

Compatible products

No compatible product

Check if this product works for your laser

Measurement type:

1

Beam size

2

Laser type

3

Beam profile

COPYRIGHT ©2024 Gentec-eo Spektrum média