EN

UP16K-15S-QED-BLU-D0

P/N TBD

Thermal detector for laser power measurement up to 15 W. With BLU (Bluetooth) embedded wireless monitor. Includes USB Bluetooth receptor.

    • 10 mm Ø
    • 12 mm Ø
    • 16 - 19 mm Ø
    • 25 mm Ø
    • 50 - 55 mm Ø
    • Convection (up to 15 W)
    • Heatsink (up to 30 W)
    • Large Heatsink (up to 50 W)
    • Fan (up to 110 W)
    • Water (up to 200 W)
    • Convection - compact casing (up to 6 W)
    • Water – large casing
    • H - Broadband
    • W - Very high power density
    • QED - High energy density
    • F - IR filter
    • HD - Broadband, high power
    • VP - Ultrashort Pulses
    • Standard
    • INTEGRA (USB)
    • INTEGRA (RS-232)
    • INTEGRA (USB with external trigger)
    • BLU (wireless)
UP16K-15S-QED-BLU-D0 UP16K-15S-QED-BLU-D0 UP16K-15S-QED-BLU-D0 UP16K-15S-QED-BLU-D0 UP16K-15S-QED-BLU-D0 UP16K-15S-QED-BLU-D0 UP16K-15S-QED-BLU-D0 UP16K-15S-QED-BLU-D0 UP16K-15S-QED-BLU-D0 UP16K-15S-QED-BLU-D0 UP16K-15S-QED-BLU-D0 UP16K-15S-QED-BLU-D0 UP16K-15S-QED-BLU-D0 UP16K-15S-QED-BLU-D0 UP16K-15S-QED-BLU-D0 UP16K-15S-QED-BLU-D0 UP16K-15S-QED-BLU-D0 UP16K-15S-QED-BLU-D0

Traceable calibration:

Logo nist

Available with

Logo blu Logo Integra

Product family key features

Modular Concept

Increase the power capability of your detector: 4 different cooling modules

HIGH PEAK POWER DIFFUSING ABSORBER

Perfect for pulsed beams with high energy density

Compact Design

23.6 mm thick

HIGH AVERAGE POWER

Measure up to 15 W of continuous power

Smart Interface

Containing all the calibration data

Award-winning technology

The UP-QED laser power detectors for extremely high density lasers were recognized among the most innovative photonics technologies for the 2021 Laser Focus World Innovators Awards, as a Gold honoree.

Compatible stand

Included

  • Calibration Calibration

    Calibration certificate

  • PWC PWC

    Personal wavelength correctionTM Certificate

  • COVER

    Protective cover for optical surfaces

Measurement capabilities

  • Maximum average power (continuous)

    15 W

  • Maximum average power (1 minute)

    20 W

  • Noise equivalent power1

    4 mW

  • Spectral range2

    0.266 - 2.5 μm

  • Typical rise time3

    2.5 s

  • Power calibration uncertainty4

    ±2.5 %

  • Repeatability

    ±0.5 %
    • 1. Nominal value, actual value depends on electrical noise in the measurement system.
    • 2. For the calibrated spectral range, see the user manual.
    • 3. With anticipation.
    • 4. Including linearity with power.

Measurement capabilities (Energy mode)

  • Maximum measurable energy1

    500 J

  • Noise equivalent energy2

    0.06 J

  • Minimum repetition period

    4 s

  • Maximum pulse width

    61 ms

  • Energy calibration uncertainty3

    ±5 %
    • 1. For 360 μs pulses. Higher pulse energy possible for long pulses (ms), less for short pulses (ns).
    • 2. Nominal value, actual value depends on electrical noise in the measurement system.
    • 3. When single-shot energy calibration is purchased

Damage thresholds

  • Maximum average power density1

    100 kW/cm²

  • Maximum energy density2

    8 J/cm²
    • 1. At 1064 nm, 10 W CW. May vary with wavelength and average power.
    • 2. At 1064 nm, 7 ns, 10 Hz. May vary with wavelength and pulse width.

Physical characteristics

  • Cooling

    Convection

  • Aperture diameter

    16 mm

  • Absorber

    QED

  • Dimensions

    50H x 80.6W x 25.6D mm

  • Weight

    0.16 kg
Print specifications

CA$2,858.00*

CONTACT SALES Explore customization possibilities

AWARD-WINNING TECHNOLOGY

The UP-QED laser power detectors for extremely high density lasers were recognized among the most innovative photonics technologies for the 2021 Laser Focus World Innovators Awards, as a Gold honoree.

The UP-QED series are power detectors for lasers with extreme power and energy density, such as laser micromachining systems. Thanks to a proprietary absorber that diffuses the measured beam and absorbs it in a larger volume, these detectors have the highest damage thresholds on the market.

The highest damage thresholds on the market with the QED absorber

Detectors with the QED absorber are designed for lasers with very high power density and/or energy density, such as laser micromachining systems. Our proprietary QED absorber diffuses the measured beam and absorbs it in a larger volume, making it almost indestructible.

Customers enjoy:

  • The highest maximum average power density damage threshold (100 kW/cm2)
  • The highest maximum energy density damage threshold
  • Very low risk of damaging the equipment with your laser
  • Perfect for pulsed beams with high energy density

Faster measurement with XNR AnticipationTM

Measure laser power up to 10x faster (model-dependant) with XNR AnticipationTM. Our proprietary algorithm looks at the rate at which the signal increases or decreases and combines this with calibration data to predict the result. The measurement is therefore calculated and displayed faster than the natural response of the detector.

Why does it matter?

  • Save several seconds to tens of seconds for each measurement
  • Shorter operation interruption
  • Faster laser output diagnostics
  • Increased productivity
  • No compromise on measurement accuracy

NIST-TRACEABLE CALIBRATION INCLUDED

Traceable calibration provides the ability to trace the readings of laser output measurements to known international measurement standards determined by the National Institute of Standards and Technology (NIST). This ensures that the measurements taken by the instruments are reliable and accurate.

Benefits include:

  • Make valid comparisons of measurements taken by other instruments inside and outside your organization and over time
  • Comply with regulations or conform to industry standards
  • Avoid costly measurement mistakes in your operations
  • Improve customer confidence in your laser systems
  • Ensure laboratory experiment validity
  • Demonstrate measurement accuracy easily with the calibration certificate we provide
 

Optional INTEGRA (USB or RS-232) output

When you choose the INTEGRA output option you get an all-in-one measurement instrument that combines both the detector and the meter in one convenient product. Plug the detector in your PC, install our free software and start measuring.

Why choose it?

  • The most cost-efficient solution
  • Same measurement performance as our other solutions
  • No compromise on interface functions and features
  • Compact solution for OEM applications and field servicing
  • Save money on recalibration with an all-in-one instrument
 

Optional BLU (wireless) output

This detector can be purchased with an embedded wireless interface. Save money by not having to purchase a separate monitor. Download our free mobile app or PC software, activate your Bluetooth connection and start measuring your laser.

Why go wireless?

  • Create your optimal measurement setup without being limited by cable length or monitor location
  • Receive data at up to 30m from the detector with the same performance
  • Enjoy a safer work environment with less tangled cables
  • Save money on recalibration with an all-in-one instrument
 

Related videos

All videos

Compatible products you may need

*Does not include shipping fees, import fees or local representation. Request quote for full details and local sales contact.

Your item has been added to your cart!

You might need these specific products to be able to use the placeholder only.

Compatible products

No compatible product

Check if this product works for your laser

Measurement type:

1

Beam size

2

Laser type

3

Beam profile

COPYRIGHT ©2024 Gentec-eo Spektrum média