XLP12-3S-VP-D0

P/N 202227

Thermopile detector for laser power measurement up to 3 W.

    • 10 mm Ø
    • 12 mm Ø
    • 16 - 19 mm Ø
    • 25 mm Ø
    • 50 - 55 mm Ø
    • Convection (up to 3 W)
    • Convection (up to 10 W)
    • Heatsink (up to 20 W)
    • Water (up to 70 W)
    • Convection - compact casing
    • Fan
    • Large Heatsink
    • Water – large casing
    • H - Broadband
    • F - IR filter
    • VP - Ultrashort Pulses
    • HD - Broadband, high power
    • QED - High energy density
    • W - Very high power density
    • Standard
    • INTEGRA (USB)
    • INTEGRA (RS-232)
    • INTEGRA (USB with external trigger)
    • BLU (wireless)
XLP12-3S-VP-D0 XLP12-3S-VP-D0 XLP12-3S-VP-D0 XLP12-3S-VP-D0 XLP12-3S-VP-D0 XLP12-3S-VP-D0 XLP12-3S-VP-D0 XLP12-3S-VP-D0 XLP12-3S-VP-D0 XLP12-3S-VP-D0 XLP12-3S-VP-D0 XLP12-3S-VP-D0 XLP12-3S-VP-D0 XLP12-3S-VP-D0 XLP12-3S-VP-D0 XLP12-3S-VP-D0 XLP12-3S-VP-D0 XLP12-3S-VP-D0

Traceable calibration:

Logo nist

Available with

Logo blu Logo Integra

Product family key features

Low Power Thermopile

Noise level of a photo detector with the large bandwidth and high power capacity of a thermal device

Minimal Thermal Drift

Only 6 µW/°C (with the IR filter)

High Sensitivity

200 mV/W (without the IR filter)

Special Model for Ultrashort Pulses

VP (volume absorber) version is perfect for low power lasers with ultrashort pulses (ps and fs)

IR Filter (XLPF12 Model)

Removes unwanted IR interference

Isolation Tube

Eliminates power fluctuations created by air turbulence

Compatible stand

Compatible displays & PC interfaces

  • MIRO ALTITUDE MIRO ALTITUDE

    Touchscreen display device for power & energy measurement. Single-channel.

  • MAESTRO MAESTRO

    Touchscreen display device for power & energy measurement. Single-channel, multiple outputs (USB, Ethernet, analog).

  • U-LINK (USB) U-LINK (USB)

    PC interface for power & energy measurement. Single-channel, USB output.

  • U-LINK (RS-232) U-LINK (RS-232)

    PC interface for power & energy measurement. Single-channel, RS-232 output.

  • BLU BLU

    Embedded wireless interface for power measurement. Can only be purchased as a detector output option.

  • TUNER TUNER

    Display device with tuning needle for power measurement. Single-channel.

  • UNO UNO

    Economical display device for power measurement. Single-channel.

  • P-LINK (USB) P-LINK (USB)

    PC interface for power measurement. Single-channel, USB output.

  • P-LINK (RS-232) P-LINK (RS-232)

    PC interface for power measurement. Single-channel, RS-232 output.

  • S-LINK-1 (Ethernet) S-LINK-1 (Ethernet)

    PC interface for power & energy measurement. Single-channel, USB & Ethernet output.

  • S-LINK-2 (Ethernet) S-LINK-2 (Ethernet)

    PC interface for power & energy measurement. Dual-channel, USB & Ethernet output.

  • M-LINK M-LINK

    PC interface for power & energy measurement. Single-channel, USB output.

  • S-LINK-1 S-LINK-1

    PC interface for power & energy measurement. Single-channel, USB output.

  • S-LINK-2 S-LINK-2

    PC interface for power & energy measurement. Dual-channel, USB output.

  • P-LINK-4 (USB) P-LINK-4 (USB)

    PC interface for power measurement. Four channels.

Included

  • Calibration certificate

  • Personal wavelength correctionTM Certificate

  • Protective cover for optical surfaces

Measurement capabilities

  • Maximum average power (continuous)

    3 W
  • Maximum average power (1 minute)

    3 W
  • Noise equivalent power1

    0.5 μW
  • Spectral range2

    0.25 - 20 μm
  • Typical rise time3

    3 s
  • Power calibration uncertainty4

    ±2.5 %
  • Repeatability

    ±0.5 %
  • Thermal drift5

    12 μW/°C
    • 1. Nominal value, actual value depends on electrical noise in the measurement system.
    • 2. For the calibrated spectral range, see the user manual.
    • 3. With anticipation.
    • 4. Including linearity with power.
    • 5. With MAESTRO.

Damage thresholds

  • Maximum average power density1

    30 W/cm²
  • Maximum energy density2

    4 J/cm²
    • 1. At 1064 nm, 1 W CW. May vary with wavelength and average power.
    • 2. At 1064 nm, 7 ns, 10 Hz. May vary with wavelength and pulse width.

Physical characteristics

  • Cooling

    Convection
  • Aperture diameter

    12 mm
  • Absorber

    VP
  • Dimensions

    73H x 73W x 20D mm (72D mm with tube)
  • Weight

    0.32 kg

CA$1,644.00*

VP absorber for ultrashort pulses

The VP is a volume absorber that handles low-power lasers with ultrashort pulses (ps and fs). It’s our absorber with the highest absorption capacity.

Customers enjoy:

  • Ideal for short pulses with higher energy density
  • Very low back reflections

Faster measurement with XNR AnticipationTM

Measure laser power up to 10x faster (model-dependant) with XNR AnticipationTM. Our proprietary algorithm looks at the rate at which the signal increases or decreases and combines this with calibration data to predict the result. The measurement is therefore calculated and displayed faster than the natural response of the detector.

Why does it matter?

  • Save several seconds to tens of seconds for each measurement
  • Shorter operation interruption
  • Faster laser output diagnostics
  • Increased productivity
  • No compromise on measurement accuracy

NIST-TRACEABLE CALIBRATION INCLUDED

Traceable calibration provides the ability to trace the readings of laser output measurements to known international measurement standards determined by the National Institute of Standards and Technology (NIST). This ensures that the measurements taken by the instruments are reliable and accurate.

Benefits include:

  • Make valid comparisons of measurements taken by other instruments inside and outside your organization and over time
  • Comply with regulations or conform to industry standards
  • Avoid costly measurement mistakes in your operations
  • Improve customer confidence in your laser systems
  • Ensure laboratory experiment validity
  • Demonstrate measurement accuracy easily with the calibration certificate we provide
 

Optional INTEGRA (USB or RS-232) output

When you choose the INTEGRA output option you get an all-in-one measurement instrument that combines both the detector and the meter in one convenient product. Plug the detector in your PC, install our free software and start measuring.

Why choose it?

  • The most cost-efficient solution
  • Same measurement performance as our other solutions
  • No compromise on interface functions and features
  • Compact solution for OEM applications and field servicing
  • Save money on recalibration with an all-in-one instrument
 

Optional BLU (wireless) output

This detector can be purchased with an embedded wireless interface. Save money by not having to purchase a separate monitor. Download our free mobile app or PC software, activate your Bluetooth connection and start measuring your laser.

Why go wireless?

  • Create your optimal measurement setup without being limited by cable length or monitor location
  • Receive data at up to 30m from the detector with the same performance
  • Enjoy a safer work environment with less tangled cables
  • Save money on recalibration with an all-in-one instrument
 

Related videos

All videos

Compatible products you may need

*Does not include shipping fees, import fees or local representation. Request quote for full details and local sales contact.

Your item has been added to your cart!

You might need these specific products to be able to use the placeholder only.

Compatible products

No compatible product

Check if this product works for your laser

Measurement type:

1

Beam size

2

Laser type

3

Beam profile

COPYRIGHT ©2024 Gentec-eo Spektrum média